manual tools for hardware maintenance and maintenance -电子游戏

       most people have the equipment or dangerous goods, usually want to know maintenance, but for the use of hand tools are often careless and let down, so that the injury rate caused by hand tools rather than machine, so the manual before using the tools maintenance and management is more important.

(1) maintenance of manual tools:

1. all tools should be checked and maintained regularly.

2. all kinds of tools should be equipped with inspection and maintenance records card, and record the maintenance and maintenance data in detail.

3. in case of failure or damage should be checked and repaired immediately.

4. when the tool is damaged, the cause of the damage should be found.

5. the right methods of use should be taught before the use of the tools.

6. do not often use tools to maintenance.

7. the various manual tools must be used in accordance with the designed use.

8. the tools are not used before they are put into prison.

9. maintenance of tools should be carried out in a state of rest.

10. to carry a sharp tool can not stab others.

11. do not use a tool that has been damaged or has a loose defect.

12. the tool has reached the service life or the use limit, and it is forbidden to use it again.

13. tool maintenance, in order not to destroy the original design principle.

the tools that can not be repaired in the 14. factory shall be sent back to the original factory for repair.

(two) management of tools:

the 1. tools should be kept in centralized custody, and easy to check and repair.

2. dangerous tools should be dispensed at the same time.

3. the various tools should be stored in a fixed place.

4. the tools should have recorded data, including the date of purchase, the price, the attachment, the service life and so on.

5. tool borrowing must be registered, and the data should be kept intact.

6. the number of tools should be checked regularly.

the storage of the 7. tools should be classified.

8. tools that are more vulnerable to damage should be backed up.

the specifications of the 9. tools are as standardized as possible.

10. precious tools should be stored properly, avoid loss.

11. the management and borrowing measures should be established.

12. the storage place should avoid damp and have good environment.

13. the industrial and commercial scrap shall be dealt with in accordance with the regulations and apply for the purchase and purchase.

the borrowing of the 14. tools should be prudent, rapid, true and simple.

manual tools are generally used in special environments, such as flammable, explosive, and extremely bad conditions. it belongs to the consumable goods, and holds the correct use of manual tools to reduce the occurrence of injury accidents.

the principle of safe use of manual tools:

select the manual tools that are suitable for the work needs. keep the tools in good use. select a good hand tool for good material. check manual tools before use. use the manual tool in the right way. manual tools should be placed in a safe place. work

next
share to:
contact us

tell us what you want.

0519-86976868
online